Layout Design of Copra Factory Facilities in Small and Medium Industry Centers Using Systematic Layout Planning Method
DOI:
https://doi.org/10.59976/jurit.v1i2.13Keywords:
Layout, Material Handling, Systematic Layout PlanningAbstract
This research was conducted on the layout of copra processing facilities. Copra is one of the products to be produced by the Small and Medium Industry Center in the Meranti Islands. The purpose of designing the layout of this copra factory facility is to provide a proposal in the form of a copra processing facility layout with the shortest material handling distance. The methods used in this study are Systematic Layout Planning (SLP) and Arena Simulation. The result of the SLP method is in the form of alternative layout proposals, which will be checked with a simulation model. This Arena simulation is carried out to see whether the production process of the resulting layout is good or not by implementing it into a conceptual model in the Arena software, which is then tested to see the disruptions that exist in the production process, such as the accumulation of raw materials at one of the stations (bottleneck). Based on data processing results, one alternative layout was selected with a material handling distance of 26.33 m from 3 existing alternatives. This selection is based on the smallest material handling distance obtained. Furthermore, testing the layout with the Arena software simulation model found that there was a disruption in the production process in the form of a buildup of raw materials at the smoking and drying station caused by the manual drying process using the scorching heat of the sun so that it takes 4-5 days for the drying process.
Downloads
References
X. Hu, “E-commerce warehouse layout optimization: systematic layout planning using a genetic algorithm,” Electron. Commer. Res., vol. 23, no. 1, pp. 97–114, 2023, doi: 10.1007/s10660-021-09521-9.
C. Zhao, “Two Generative Design Methods of Hospital Operating Department Layouts Based on Healthcare Systematic Layout Planning and Generative Adversarial Network,” J. Shanghai Jiaotong Univ., vol. 26, no. 1, pp. 103–115, 2021, doi: 10.1007/s12204-021-2265-9.
A. R. S. C. Rodriguez, “An extension of systematic layout planning by using fuzzy AHP and fuzzy VIKOR methods: A case study,” Eur. J. Ind. Eng., vol. 16, no. 1, pp. 1–30, 2022, doi: 10.1504/EJIE.2022.119368.
L. S. Goecks, “Analytic hierarchy process as a decision-making tool for systematic layout planning, involving social responsibility criteria: A case study,” Int. J. Ind. Syst. Eng., vol. 40, no. 1, pp. 29–50, 2022, doi: 10.1504/IJISE.2022.120806.
A. Onaga-Nishimura, “Service Management Model Based on Lean Service and Systematic Layout Planning for the Improvement of Customer Satisfaction in an SME in the Restaurant Sector in Peru,” ACM International Conference Proceeding Series. pp. 242–249, 2022. doi: 10.1145/3568834.3568853.
F. A. Pacheco-Colcas, “Production Model based on Systematic Layout Planning and Total Productive Maintenance to increase Productivity in food manufacturing companies,” ACM International Conference Proceeding Series. pp. 299–306, 2022. doi: 10.1145/3568834.3568854.
S. Cáceres-Gelvez, “A Systematic Layout Planning and TOPSIS Application for the Design of a Power Generation Turbine Parts Repair Workshop,” Ing. y Univ., vol. 26, 2022, doi: 10.11144/Javeriana.iued26.slpt.
V. Kumar, “Improvement of facility layout design using Systematic Layout planning methodology,” Journal of Physics: Conference Series, vol. 2312, no. 1. 2022. doi: 10.1088/1742-6596/2312/1/012089.
L. Zhu, “Factory layout optimization based on Systematic Layout Planning and genetic algorithm,” Proceedings of SPIE - The International Society for Optical Engineering, vol. 12176. 2022. doi: 10.1117/12.2636407.
P. Burggräf, “Fields of action towards automated facility layout design and optimization in factory planning – A systematic literature review,” CIRP J. Manuf. Sci. Technol., vol. 35, pp. 864–871, 2021, doi: 10.1016/j.cirpj.2021.09.013.
G. J. L. Micheli, “A revised systematic layout planning to fit disabled workers contexts,” Sustain., vol. 13, no. 12, 2021, doi: 10.3390/su13126850.
M. Faishal, “Reducing Waste of Material Transport in Manufacturing Facility using Systematic Layout Planning and Simulation Approach,” ASM Sci. J., vol. 16, pp. 134–142, 2021, [Online]. Available: https://api.elsevier.com/content/abstract/scopus_id/85134722795
D. Ramadhan, “Redesigning the facility layout with systematic layout planning method and lean manufacturing approach on the production floor at PT. Baruna Trayindo Jaya,” Proceedings of the International Conference on Industrial Engineering and Operations Management. pp. 2596–2609, 2021. [Online]. Available: https://api.elsevier.com/content/abstract/scopus_id/85114242883
A. E. F. Pérez, “Design of improvement proposal for the reduction of waste through the 5s methodology and systematic layout planning under a kaizen environment in a bakery company in the food sector, 2022,” Proceedings of the LACCEI international Multi-conference for Engineering, Education and Technology, vol. 2023. 2023. [Online]. Available: https://api.elsevier.com/content/abstract/scopus_id/85172397133
J. Zhang, “Research on the Planning and Layout of Shanghai-Hangzhou Railway Corridor Based on Systematic Thinking,” J. Railw. Eng. Soc., vol. 40, no. 6, pp. 12–17, 2023, [Online]. Available: https://api.elsevier.com/content/abstract/scopus_id/85172198698
M. Xu, “Optimization algorithms for construction site layout planning: a systematic literature review,” Engineering, Construction and Architectural Management, vol. 27, no. 8. pp. 1913–1938, 2020. doi: 10.1108/ECAM-08-2019-0457.
S. Su, “Cabin Placement Layout Optimisation Based on Systematic Layout Planning and Genetic Algorithm,” Polish Marit. Res., vol. 27, no. 1, pp. 162–172, 2020, doi: 10.2478/pomr-2020-0017.
M. Rabanal, “Systematic layout planning: A research on the third party logistics of a peruvian company,” Advances in Intelligent Systems and Computing, vol. 1018. pp. 988–993, 2020. doi: 10.1007/978-3-030-25629-6_153.
H. Liu, “A study of the layout planning of plant facility based on the timed Petri net and systematic layout planning,” PLoS One, vol. 15, no. 9, 2020, doi: 10.1371/journal.pone.0239685.
K. B. Bagaskara, “Redesign layout planning of raw material area and production area using systematic layout planning (SLP) methods (case study of CV oto boga jaya),” IOP Conference Series: Materials Science and Engineering, vol. 852, no. 1. 2020. doi: 10.1088/1757-899X/852/1/012122.
L. Gozali, “Planning the New Factory Layout of PT Hartekprima Listrindo using Systematic Layout Planning (SLP) Method,” IOP Conference Series: Materials Science and Engineering, vol. 847, no. 1. 2020. doi: 10.1088/1757-899X/847/1/012001.
S. Khariwal, “Layout improvement of railway workshop using systematic layout planning (SLP)-A case study,” Materials Today: Proceedings, vol. 44. pp. 4065–4071, 2020. doi: 10.1016/j.matpr.2020.10.444.
Sunardi, “Redesign of the Production Facility Layout by Using Systematic Layout Planning Method at Cahaya Bintang Mas Company Surabaya,” Journal of Physics: Conference Series, vol. 1569, no. 3. 2020. doi: 10.1088/1742-6596/1569/3/032007.
D. Zhao, “Layout Design of Warehouse Based on Systematic Layout Planning and GA-ACO Algorithm,” Proceedings - 2020 Chinese Automation Congress, CAC 2020. pp. 7101–7104, 2020. doi: 10.1109/CAC51589.2020.9327612.
N. R. Alfiansyah, “Increase Productivity by Eliminating Waste and Using Systematic Layout Planning in Airline Catering Service,” IOP Conference Series: Materials Science and Engineering, vol. 1003, no. 1. 2020. doi: 10.1088/1757-899X/1003/1/012051.
F. Budianto, “Redesigning Furniture Production Floors Using Systematic Layout Planning and ALDEP Method to Minimize Material Handling Costs,” MECnIT 2020 - International Conference on Mechanical, Electronics, Computer, and Industrial Technology. pp. 84–90, 2020. doi: 10.1109/MECnIT48290.2020.9166613.
D. K. Sobek, “Teaching systematic layout planning using a problem-solving studio approach,” Proceedings of the 2020 IISE Annual Conference. pp. 1163–1168, 2020. [Online]. Available: https://api.elsevier.com/content/abstract/scopus_id/85105630458
F. G. Tsegay, “Mathematical optimization methods for inner-city construction site layout planning: a systematic review,” Asian Journal of Civil Engineering. 2023. doi: 10.1007/s42107-023-00713-2.
S. Rohmawati, “The Simulation SIMULASI MODEL SISTEM PELAYANAN TRUCK PADA PROSES MUAT PUPUK DENGAN MENGGUNAKAN SOFTWARE ARENA UNTUK MENGOPTIMALKAN FASILITAS PELAYANAN (Studi Kasus: Gudang Multiguna (GMG) PT Petrokimia Gresik),” JUSTI (Jurnal Sist. dan Tek. Ind., vol. 3, no. 2, pp. 204–216, 2023.
D. Santoso, M. Pradipto, and R. Setiowati, “Usulan Layout Lantai Produksi Industri Mebel Menggunakan Systematic Layout Planning Dan Simulasi,” J. Optimasi Tek. Ind., vol. 4, no. 1, pp. 7–12, 2022.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Rio Erwanda
This work is licensed under a Creative Commons Attribution 4.0 International License.
