Application of Quality Control and Risk Management in Maintaining Product Quality with A Risk Breakdown Structure Approach

Alvina Alvina

doi:10.59976/jurit.v1i2.15

Authors

Alvina Alvina Universitas Islam Negeri Sultan Syarif Kasim Riau

DOI:

https://doi.org/10.59976/jurit.v1i2.15

Abstract

This research was conducted in a company that operates in the printing or graphics sector. The concept of quality control is the most critical part because newspapers or printed media are products with the fastest production process. PT carries out the quality control process. PT XYZ to lower the failed results on the paper. Quality control measurements use the P chart method. Results of quality control measurements at PT. XYZ is outside the control limits, and that is not normal, so corrective action is needed, especially the number of failed newspapers. On average, newspapers failed from January to May, reaching 8.24% of the total newspapers produced. Events that cause failure in newspapers are analyzed through risk management. Risk management measurements use the Risk Breakdown Structure (RBS) and Fault Tree Analysis (FTA) methods. Risk management results show that five risks cause newspaper failure, namely scattered ink, slanted fonts, blurred images, dirty images, and thick fonts.

Downloads

Download data is not yet available.

References

D. Sharma, "Production of eco-friendly and better-quality sugarcane bagasse paper using crude xylanase and pectinase biopulping strategy," 3 Biotech, Vol. 13, No. 2, 2023, DOI: 10.1007/S13205-023-03484-4.

M. Schroth, "Optimization paper production through digitalization by developing an assistance system for machine operators including quality forecast: a concept," Lecture Notes in Informatics (LNI), Proceedings - Series of the Gesellschaft für Informatik (GI). Pp. 177–186, 2022. [Online]. Available: https://api.elsevier.com/content/abstract/scopus_id/85139873097

V. Kumar, "PRODUCTION OF ADVANCED FIBRILLATED CELLULOSIC MATERIAL FROM WHEAT STRAW BY REFINING PROCESS TO IMPROVE PAPER QUALITY," Cellul. Chem. Technol., Vol. 56, No. 5, pp. 625–635, 2022, doi: 10.35812/CelluloseChemTechnol.2022.56.55.

G. Niu, "A novel effluent quality predicting model based on genetic-deep belief network algorithm for cleaner production in a full-scale paper-making wastewater treatment," J. Clean. Prod., Vol. 265, 2020, DOI: 10.1016/J.Jclepro.2020.121787.

D. C. Beardmore, "Roadway design and construction in infrastructure limited contexts: a risk breakdown structure," Int. J. Constr. Manag., Vol. 23, No. 10, pp. 1675–1683, 2023, doi: 10.1080/15623599.2021.1999768.

V. Kumar, "Facile chemo-refining approach for production of micro-nanofibrillated cellulose from bleached mixed hardwood pulp to improve paper quality," Carbohydr. Polym., Vol. 238, 2020, DOI: 10.1016/J.Carbpol.2020.116186.

A. López-Gómez, "Active paper sheets including nanoencapsulated essential oils: A green packaging technique to control ethylene production and maintain quality in fresh horticultural products—A case study on flat peaches," Foods, Vol. 9, No. 12, 2020, DOI: 10.3390/foods9121904.

L. M. Varghese, "Ultrafiltered biopulping strategy for the production of good quality pulp and paper from sugarcane bagasse," Environ. Sci. Pollut. Res., Vol. 27, No. 35, pp. 44614–44622, 2020, doi: 10.1007/s11356-020-11102-6.

A. Syberfeldt, "Image processing based on deep neural networks for detecting quality problems in paper bag production," Procedia CIRP, vol. 93. Pp. 1224–1229, 2020. DOI: 10.1016/J.Procir.2020.04.158.

S. P. Singh, "Implementation of innovative process control techniques to minimize variations, improve quality and increase production in paper industry," IPPTA Q. J. Indian Pulp Pap. Tech. Assoc., Vol. 32, No. 2, pp. 125–130, 2020, [Online]. Available: https://api.elsevier.com/content/abstract/scopus_id/85169453983

I. Remizova, "Development of the planning model of the production and cutting of the paper web ensuring the quality of the finished products," IOP Conference Series: Materials Science and Engineering, Vol. 940, No. 1. 2020. doi: 10.1088/1757-899X/940/1/012082.

D. V Aryanto, "Identification Risk Potential Hazard of Railway Project Based on the Work Breakdown Structure to Improve Safety Performance," Lecture Notes in Civil Engineering, vol. 225. Pp. 641–650, 2023. DOI: 10.1007/978-981-16-9348-9_56.

D. Selvakarthi, "Experimental and Automated Setup to Control the White Liquor Flow for Enhanced Paper Quality," International Conference on Innovative Data Communication Technologies and Application, ICIDCA 2023 - Proceedings. Pp. 531–536, 2023. DOI: 10.1109/ICIDCA56705.2023.10099692.

M. Y. Kuriansyah, "Risk identification for design and build breakwater project using risk breakdown structure (case study: Sanur project, Bali, Indonesia)," AIP Conference Proceedings, vol. 2594. 2023. DOI: 10.1063/5.0112062.

N. Colozza, "An origami paper-based electrochemical biosensing platform for quality control of agri-food waste in the valorization strategy," Microchim. Acta, Vol. 189, No. 8, 2022, DOI: 10.1007/S00604-022-05392-5.

U. Zaimis, "RECYCLED ALGAE PAPER DENSITY CONTROL SYSTEM FOR QUALITY SCREENING WITH ADJUSTABLE LIGHT SOURCE WAVELENGTH," Engineering for Rural Development, vol. 21. Pp. 818–823, 2022. doi: 10.22616/ERDev.2022.21.TF254.

Y. Fan, "Development of a triple channel colorimetric paper sensor array based on quantum dots: A robust tool for process monitoring and quality control of basic liquors of Baijiu," Sensors Actuators, B Chem., Vol. 319, 2020, DOI: 10.1016/J.SNB.2020.128260.

M. Czarnek, "Comparison of the quality of occlusion control with the use of occlusion paper and t-scan, based on the literature," Protetyka Stomatologiczna, Vol. 70, No. 4. Pp. 407–416, 2020. DOI: 10.5114/PS/131650.

R. Jaimun, "Efficacy of chitosan-coated paper incorporated with vanillin and ethylene adsorbents on the control of anthracnose and the quality of Nam Dok Mai mango fruit," Packag. Technol. Sci., Vol. 32, No. 8, pp. 383–394, 2019, DOI: 10.1002/PTS.2446.

L. Yin, "The correlation analysis of equipment standardization and quality control in paper mills," Pap. Asia, Vol. 2, No. 3, pp. 127–129, 2019, [Online]. Available: https://api.elsevier.com/content/abstract/scopus_id/85066012489

R. Kountur, "Risk identification approaches and the number of risks identified: the use of work breakdown structure and business process," Humanit. Soc. Sci. Commun., Vol. 10, No. 1, 2023, DOI: 10.1057/S41599-023-02028-8.

A. Erfani, "Data-Driven Approach to Risk Identification for Major Transportation Projects: A Common Risk Breakdown Structure," IEEE Trans. Eng. Manag., 2023, doi: 10.1109/TEM.2023.3279237.

S. M. Ali, "Data quality: A negotiator between paper-based and digital records in pakistan's TB control program," Data, Vol. 3, No. 3, 2018, DOI: 10.3390/data3030027.

J. Yuan, "Research on quality control estimation model of the digital archive system of paper based medical records," Pap. Asia, Vol. 1, pp. 125–130, 2018, [Online]. Available: https://api.elsevier.com/content/abstract/scopus_id/85058077710

M. Bepari, "A comparative study of project risk management with risk breakdown structure (RBS): a case of commercial construction in India," Int. J. Constr. Manag., 2022, doi: 10.1080/15623599.2022.2124657.

J. Jeong, "Novel approach of the integrated work & risk breakdown structure for identifying the hierarchy of fatal incident in construction industry," J. Build. Eng., Vol. 41, 2021, DOI: 10.1016/J.Jobe.2021.102406.

A. Anggraini, "Development of work breakdown structure standard for safety planning on stadium construction work based on risk," Journal of Physics: Conference Series, Vol. 1858, No. 1. 2021. DOI: 10.1088/1742-6596/1858/1/012073.

H. Lv, "Risk assessment on the CCUS project using risk breakdown structure methodology: A case study on Jilin oilfield CO2-EOR Hei-79 block," Greenh. Gases Sci. Technol., Vol. 11, No. 4, pp. 750–763, 2021, DOI: 10.1002/GHG.2077.

D. B. Nugroho, "Development of Work Breakdown Structure (WBS) for Safety Planning on Tunneling Work Projects Based on Risk," Journal of Physics: Conference Series, Vol. 1858, No. 1. 2021. DOI: 10.1088/1742-6596/1858/1/012076.

A. F. Putri, "Development of Risk-Based Standardized WBS (Work Breakdown Structure) for Mechanical and Electrical Works of Coal-Fired Steam Power Plant Construction Project in Indonesia to Improve Time Performance," Proceedings of the International Conference on Industrial Engineering and Operations Management. Pp. 649–660, 2021. [Online]. Available: https://api.elsevier.com/content/abstract/scopus_id/85126063044