Scheduling Preventive Maintenance to Determine Maintenance Actions on Screw Press Machine

Ferdi Pohan; Imam Saputra; Rahmat Tua

doi:10.59976/jurit.v1i1.4

Authors

Ferdi Pohan Universitas Sumatera Utara
Imam Saputra Universitas Sumatera Utara
Rahmat Tua Universitas Sumatera Utara

DOI:

https://doi.org/10.59976/jurit.v1i1.4

Abstract

PT. PAS is a company engaged in the manufacturing industry, is a company that manages palm oil into Crude Palm Oil (CPO) and Palm Kernel (PK) with a capacity of 30 tons/hour. The method used in this study is Relia-bility Centered Maintenance (RCM). This method can determine the actions of preventive maintenance activi-ties on each component of the screw press machine. This study aims to provide proposals for scheduling pre-ventative Maintenance of screw press machines using the Reliability Centered Maintenance (RCM) approach and determine appropriate maintenance actions in damage prevention. Based on the results of the research con-ducted, it can be concluded that in the Reliability Centered Maintenance (RCM) approach, it is known that five types of damage are a priority for repair. The types of damage included in the repair priority are worm screws, extension shafts, bearings, press cages, and oil seals. The proposed maintenance time for each critical compo-nent is a worm screw component maintenance time interval of 307.84 hours, and changeover schedules every 2035.3 hours. Component extension shaft maintenance time interval 279.5 hours, changeover schedule every 1824.5 hours. Bearing components have a maintenance time interval of 300.2 hours and a changeover schedule of every 1492.5 hours. Oil seal components maintenance time interval 286.1 hours, changeover schedule every 2769.9 hours. Press cage components maintenance time interval 250.72 hours, changeover schedule every 3277.8 hours. Actions are taken in the form of direct prevention of the source of component damage based on the time or age of the component.

Downloads

Download data is not yet available.

References

N. Sembiring, "The spare part maintenance of cake breaker conveyor with reliability centered spares method," IOP Conference Series: Materials Science and Engineering, vol. 523, no. 1. 2019. doi: 10.1088/1757-899X/523/1/012079.

N. A. Sidabutar, "Propose Improvement Maintenance Activities of Screw Press to Reduce Waste Using Lean Maintenance Concept," IOP Conference Series: Materials Science and Engineering, vol. 505, no. 1. 2019. doi: 10.1088/1757-899X/505/1/012045.

A. Popa, "A framework of best practices for delivering successful artificial intelligence projects. A case study demonstration," Proceedings - SPE Annual Technical Conference and Exhibition, vol. 2021. 2021. doi: 10.2118/206014-MS.

L. Zhang, "Optimizing imperfect preventive maintenance in multi-component repairable systems under s-dependent competing risks," Reliab. Eng. Syst. Saf., vol. 219, 2022, doi: 10.1016/j.ress.2021.108177.

A. A. Arzhaev, "On the Importance of Applying RCM Technology to Passive Components of Russian NPPs," Lecture Notes in Mechanical Engineering. pp. 217–230, 2022. doi: 10.1007/978-981-16-9376-2_22.

L. Ciani, "Condition-based Maintenance for OilGas system basing on Failure Modes and Effects Analysis," 5th International Forum on Research and Technologies for Society and Industry: Innovation to Shape the Future, RTSI 2019 - Proceedings. pp. 85–90, 2019. doi: 10.1109/RTSI.2019.8895587.

A. Rahman, "Industry 4.0 and society 5.0 through lens of condition based maintenance (CBM) and machine learning of artificial intelligence (MLAI)," IOP Conference Series: Materials Science and Engineering, vol. 852, no. 1. 2020. doi: 10.1088/1757-899X/852/1/012022.

M. S. Alvarez-Alvarado, "Reliability-based smart-maintenance model for power system generators," IET Gener. Transm. Distrib., vol. 14, no. 9, pp. 1770–1780, 2020, doi: 10.1049/iet-gtd.2019.1186.

J. Wang, "Digital twin based intelligent risk decision-making system of compressor station equipment," Nat. Gas Ind., vol. 41, no. 7, pp. 115–123, 2021, doi: 10.3787/j.issn.1000-0976.2021.07.013.

R. Negi, "Experience in Asset Performance Management Analytics for decision support on Transmission Distribution Assets," Asia-Pacific Power and Energy Engineering Conference, APPEEC, vol. 2019. 2019. doi: 10.1109/APPEEC45492.2019.8994622.

J. Dias, "Productivity improvement of transmission electron microscopes - A case study," Procedia Manufacturing, vol. 51. pp. 1559–1566, 2020. doi: 10.1016/j.promfg.2020.10.217.

C. C. D. F. Moraes, "Using the multi-criteria model for optimization of operational routes of thermal power plants," Energies, vol. 14, no. 12, 2021, doi: 10.3390/en14123682.

S. N. Kamble, "Machine health monitoring with life cycle cost analysis by condition monitoring," Materials Today: Proceedings, vol. 52. pp. 893–897, 2022. doi: 10.1016/j.matpr.2021.10.296.

S. K. Palei, "Reliability-Centered Maintenance of Rapier Dragline for Optimizing Replacement Interval of Dragline Components," Mining, Metall. Explor., vol. 37, no. 4, pp. 1121–1136, 2020, doi: 10.1007/s42461-020-00226-5.

S. J. Kim, "Comparative Study for Inspection Planning of Aircraft Structural Components," Int. J. Aeronaut. Sp. Sci., vol. 22, no. 2, pp. 328–337, 2021, doi: 10.1007/s42405-020-00319-x.

A. Jiang, "An operating environment-based preventive maintenance decision model," J. Qual. Maint. Eng., vol. 26, no. 4, pp. 592–610, 2020, doi: 10.1108/JQME-01-2019-0003.

K. Chung, "Cloud based u-healthcare network with QoS guarantee for mobile health service," Cluster Comput., vol. 22, pp. 2001–2015, 2019, doi: 10.1007/s10586-017-1120-0.

E. F. Mami, "Maintenance optimisation through quality management: A case study in 'Alzinc' Plant in Algeria," Int. J. Product. Qual. Manag., vol. 27, no. 1, pp. 97–123, 2019, doi: 10.1504/IJPQM.2019.099629.

S. B. Singh, "Reliability centered maintenance used in metro railways," J. Eur. des Syst. Autom., vol. 53, no. 12, pp. 11–19, 2020, doi: 10.18280/jesa.530102.

S. Luongo, "Human Machine Interface Issues for Drone Fleet Management," Advances in Intelligent Systems and Computing, vol. 876. pp. 791–796, 2019. doi: 10.1007/978-3-030-02053-8_120.

Z. Hussain, "Establishing simulation model for optimizing efficiency of CNC machine using reliability-centered maintenance approach," Int. J. Model. Simulation, Sci. Comput., vol. 10, no. 6, 2019, doi: 10.1142/S179396231950034X.

K. F. Tee, "Reliability-based preventive maintenance strategies of road junction systems," Int. J. Qual. Reliab. Manag., vol. 36, no. 5, pp. 752–781, 2019, doi: 10.1108/IJQRM-01-2018-0018.

I. P. M. Derks, "Predictors and patterns of eating behaviors across childhood: Results from The Generation R study," Appetite, vol. 141, 2019, doi: 10.1016/j.appet.2019.05.026.

Y. T. Prasetyo, "Equipment Reliability Optimization Using Predictive Reliability Centered Maintenance: A Case-Study Illustration and Comprehensive Literature Review," 2020 7th International Conference on Frontiers of Industrial Engineering, ICFIE 2020. pp. 93–97, 2020. doi: 10.1109/ICFIE50845.2020.9266728.

M. A. Arjomandi, "A fuzzy DEMATEL-ANP-VIKOR analytical model for maintenance strategy selection of safety critical assets," Adv. Mech. Eng., vol. 13, no. 4, 2021, doi: 10.1177/1687814021994965.

J. Geisbush, "Developing a Reliability Centered Maintenance Model for Large Diameter Pipeline Maintenance," Pipelines 2022: Planning and Design - Proceedings of Sessions of the Pipelines 2022 Conference, vol. 2. pp. 150–160, 2022. doi: 10.1061/9780784484289.018.

J. Taverniers, "The Tides of the Zodiac MK VI HD: Comparing the Usability of Inflatable Boats for Seaborne Operations," IISE Trans. Occup. Ergon. Hum. Factors, vol. 7, no. 1, pp. 22–30, 2019, doi: 10.1080/24725838.2019.1584775.

M. Shafiee, "An integrated FTA-FMEA model for risk analysis of engineering systems: A case study of subsea blowout preventers," Appl. Sci., vol. 9, no. 6, 2019, doi: 10.3390/app9061192.

A. P. Marugán, "Reliability analysis of detecting false alarms that employ neural networks: A real case study on wind turbines," Reliab. Eng. Syst. Saf., vol. 191, 2019, doi: 10.1016/j.ress.2019.106574.

Y. Praharsi, I. K. Sriwana, and D. M. Sari, “Perancangan Penjadwalan Preventive Maintenance Pada Pt. Artha Prima Sukses Makmur,” J. Ilm. Tek. Ind., vol. 14, no. 1, pp. 59–65, 2015.

O. D. Cahyani and I. Iftadi, “Penjadwalan Preventive Maintenance dengan Metode Reliability Centered Maintenance pada Stasiun Cabinet PU di PT IJK,” Teknoin, vol. 27, no. 1, pp. 25–34, 2021.

M. I. Haq and D. Riandadari, “Penentuan Penjadwalan Preventive Maintenance Pada Komponen Mesin Callender Di Pt. Karet Ngagel Surabaya Wira Jatim,” J. Pendidik. Tek. Mesin, vol. 9, no. 1, 2019.