Cake Breaker Conveyor Machine Maintenance System Analysis Using the Reliability-Centered Maintenance (RCM) Method

Basuki Nanda; Valentino Roni

doi:10.59976/jurit.v1i3.34

Authors

Basuki Nanda Universitas Lambung Mangkurat
Valentino Roni Universitas Lambung Mangkurat

DOI:

https://doi.org/10.59976/jurit.v1i3.34

Abstract

Machine maintenance plays a vital role in the production activities of a company, which concerns the smooth and bottleneck of production. This research was conducted in a company engaged in palm oil processing. The company often suffers from machine breakdowns and has not found a suitable solution. Reliability Maintenance is one of the methods used to determine the appropriate maintenance actions for each critical component on the Cake Breaker Conveyor (CBC) machine, based on analysis using Failure Mode and Effect Analysis (FMEA) by looking at the highest RPN value of each component, 4 critical elements are obtained from the 11 main features of the Cake Breaker Conveyor (CBC) machine, namely bearing parts, Universal Joint, Rod Clutch and Pen. Determine the maintenance schedule of critical components at the seed separation station. Taking damage, lognormal distribution, proposed replacement schedule 461.5 (hours), pen damage, normal distribution, proposed replacement schedule 587.29 (hours), universal joint damage, normal distribution, proposed replacement schedule 536.46 (hours), clutch rod damage, normal distribution, proposed replacement schedule 581.6 (hours), and axle damage, normal distribution, proposed replacement schedule 586.6 (hours).

Downloads

Download data is not yet available.

References

M. Azimian, “Appropriate strategy selection for reliability-centered maintenance of one-shot systems using fuzzy model,” J. Qual. Maint. Eng., vol. 28, no. 3, pp. 634–652, 2022, doi: 10.1108/JQME-06-2020-0050.

A. Mubarak, “Digital Twin Enabled Industry 4.0 Predictive Maintenance Under Reliability-Centred Strategy,” 2022 1st International Conference on Electrical, Electronics, Information and Communication Technologies, ICEEICT 2022. 2022. doi: 10.1109/ICEEICT53079.2022.9768590.

M. H. Enjavimadar, “Optimal reliability-centered maintenance strategy based on the failure modes and effect analysis in power distribution systems,” Electr. Power Syst. Res., vol. 203, 2022, doi: 10.1016/j.epsr.2021.107647.

S. S. Patil, “Optimization of maintenance strategies for steam boiler system using reliability-centered maintenance (RCM) model – A case study from Indian textile industries,” Int. J. Qual. Reliab. Manag., vol. 39, no. 7, pp. 1745–1765, 2022, doi: 10.1108/IJQRM-07-2021-0216.

J. Geisbush, “Developing a Reliability Centered Maintenance Model for Large Diameter Pipeline Maintenance,” Pipelines 2022: Planning and Design - Proceedings of Sessions of the Pipelines 2022 Conference, vol. 2. pp. 150–160, 2022. doi: 10.1061/9780784484289.018.

A. Alizadeh, “Reliability-Centered Maintenance Scheduling Considering Failure Rates Uncertainty: A Two-Stage Robust Model,” IEEE Trans. Power Deliv., vol. 37, no. 3, pp. 1941–1951, 2022, doi: 10.1109/TPWRD.2021.3101458.

S. Almahmoud, “Exploiting Dynamic Programming in Optimizing Reliability-Centered Maintenance: Case Study of Medium-Sized Aluminum Manufacturing Plant,” J. Sci. Ind. Res. (India)., vol. 81, no. 9, pp. 982–988, 2022, doi: 10.56042/JSIR.V81I09.58918.

J. W. Shin, “Reliability-Centered Maintenance Scheduling of Photovoltaic Components According to Failure Effects,” Energies, vol. 15, no. 7, 2022, doi: 10.3390/en15072529.

J. L. C. Valdivia, “Application of Reliability Centered Maintenance Tools to Standardize Processes Required by ISO/IEC 17025,” Proceedings of the LACCEI international Multi-conference for Engineering, Education and Technology, vol. 2022. 2022. doi: 10.18687/LACCEI2022.1.1.704.

X. Yang, “Mission reliability–centered maintenance approach based on quality stochastic flow network for multistate manufacturing systems,” Eksploat. i Niezawodn., vol. 24, no. 3, pp. 455–467, 2022, doi: 10.17531/ein.2022.3.7.

J. W. Lee, “Reliability-Centered Maintenance Strategy for Redundant Power Networks Using the Cut Set Method,” J. Electr. Eng. Technol., vol. 17, no. 3, pp. 1615–1621, 2022, doi: 10.1007/s42835-022-01031-4.

X. Yang, “Mission reliability-centered opportunistic maintenance approach for multistate manufacturing systems,” Reliab. Eng. Syst. Saf., vol. 241, 2024, doi: 10.1016/j.ress.2023.109693.

J. Geisbush, “Reliability centered maintenance (RCM): literature review of current industry state of practice,” J. Qual. Maint. Eng., vol. 29, no. 2, pp. 313–337, 2023, doi: 10.1108/JQME-02-2021-0018.

M. Song, “Automatic identification of maintenance significant items in reliability centered maintenance analysis by using functional modeling and reasoning,” Comput. Ind. Eng., vol. 182, 2023, doi: 10.1016/j.cie.2023.109409.

U. S. Kalghatgi, “Creating Value for Reliability Centered Maintenance (RCM) in Ship Machinery Maintenance from BIG Data and Artificial Intelligence,” J. Inst. Eng. Ser. C, vol. 104, no. 2, pp. 449–453, 2023, doi: 10.1007/s40032-022-00900-1.

M. C. Jena, “Integration of Industry 4.0 with reliability centered maintenance to enhance sustainable manufacturing,” Environ. Prog. Sustain. Energy, 2023, doi: 10.1002/ep.14321.

R. F. da Silva, “Reliability and Risk Centered Maintenance: A Novel Method for Supporting Maintenance Management,” Appl. Sci., vol. 13, no. 19, 2023, doi: 10.3390/app131910605.

Musthopa, “Electric power distribution maintenance model for industrial customers: Total productive maintenance (TPM), reliability-centered maintenance (RCM), and four-discipline execution (4DX) approach,” Energy Reports, vol. 10, pp. 3186–3196, 2023, doi: 10.1016/j.egyr.2023.09.129.

C. R. C. de Oliveira, “Combined application of condition-based maintenance and reliability centred maintenance using PFMEA and lean concepts – a case study,” International Journal of Information and Decision Sciences, vol. 15, no. 3. pp. 302–325, 2023. doi: 10.1504/IJIDS.2023.132825.

C. Hudon, “Using Partial Discharge Measurements for implementing Reliability centered Maintenance,” 2023 IEEE Electrical Insulation Conference, EIC 2023. 2023. doi: 10.1109/EIC55835.2023.10177317.

A. N. Qarahasanlou, “Operating Environmental Condition Effect on Reliability-Centred Maintenance,” J. Min. Environ., vol. 14, no. 2, pp. 667–688, 2023, doi: 10.22044/jme.2023.12767.2318.

E. M. Widodo, “Application of reliability centered maintenance centrifugal pumps to minimize downtime in PDAM Magelang city,” AIP Conference Proceedings, vol. 2706. 2023. doi: 10.1063/5.0134743.

N. Al-Farsi, “Reliability-centered maintenance application for the development of maintenance strategy for a chemical plant,” Proceedings of SPIE - The International Society for Optical Engineering, vol. 12616. 2023. doi: 10.1117/12.2675549.

W. H. Wang, “Application of the reliability-centered maintenance techniques for dynamic equipment in the petrochemical ammonia-related systems,” E3S Web of Conferences, vol. 385. 2023. doi: 10.1051/e3sconf/202338504014.

K. Zadiran, “New Method of Degradation Process Identification for Reliability-Centered Maintenance of Energy Equipment,” Energies, vol. 16, no. 2, 2023, doi: 10.3390/en16020575.

J. Sobral, “Application of Reliability Centered Maintenance to wind turbines,” Trends in Renewable Energies Offshore - Proceedings of the 5th International Conference on Renewable Energies Offshore, RENEW 2022. pp. 867–875, 2023. doi: 10.1201/9781003360773-96.

Z. Yang, “A study on overall line efficiency (OLE) centered production line maintenance prioritization considering equipment operational reliability,” Int. J. Adv. Manuf. Technol., vol. 124, no. 11, pp. 3783–3794, 2023, doi: 10.1007/s00170-021-07547-9.

D. He, “A Novel Reliability-Centered Opportunistic Maintenance Strategy for Metro Train Complex Systems,” IEEE Intell. Transp. Syst. Mag., vol. 14, no. 3, pp. 146–159, 2022, doi: 10.1109/MITS.2020.3014080.

L. Koutsoyiannis, “Using Asset Performance Management APM to Deliver a Reliability Centered Maintenance RCM Approach in an Offshore Production Environment,” Proceedings of the Annual Offshore Technology Conference. 2022. doi: 10.4043/32137-MS.

T. A. Al-Harbi, “Development of Reliability Centered Maintenance System Using Artificial Intelligence,” 2022 Saudi Arabia Smart Grid Conference, SASG 2022. 2022. doi: 10.1109/SASG57022.2022.10199533.

Q. Zhang, “Analysis of the Application Prospects of Reliability-Centered Maintenance in the Operation and Maintenance Management of Air Traffic Control Equipment,” IET Conference Proceedings, vol. 2022, no. 21. pp. 1891–1898, 2022. doi: 10.1049/icp.2022.3137.

M. Abbasghorbani, “Reliability-Centered Maintenance for Overhead Transmission Lines in Composite Power System,” Int. Trans. Electr. Energy Syst., vol. 2022, 2022, doi: 10.1155/2022/1170269.

N. Siswantoro, “A Case Study Maintenance Task Allocation Analysis on Marine Loading Arm Using Reliability Centered Maintenance,” IOP Conference Series: Earth and Environmental Science, vol. 972, no. 1. 2022. doi: 10.1088/1755-1315/972/1/012032.

R. M. Simanungkalit, S. Suliawati, and T. Hernawati, “Analisis Penerapan Sistem Perawatan dengan Menggunakan Metode Reliability Centered Maintenance (RCM) pada Cement Mill Type Tube Mill di PT Cemindo Gemilang Medan,” Blend Sains J. Tek., vol. 2, no. 1, pp. 72–83, 2023.

R. P. Putra and A. E. Nurhidayat, “Manajemen Perawatan Mesin Genset Gedung Plaza Mandiri Menggunakan Metode Realibility Centered Maintenance dan Maintenance Value Stream Map,” J. Indones. Sos. Teknol., vol. 3, no. 10, pp. 1101–1116, 2022.

M. Fitri and M. Farid, “Perawatan Mesin Crusher Menggunakan Metode RCM dan MVSM di PT. Galatta Lestarindo Sijunjung,” J. Teknol., vol. 13, no. 1, pp. 52–57, 2023.

M. A. Samudro, “Penentuan Jadwal Perawatan Pada Billet Reheating Furnace di PT X Dengan Metode RCM II,” Eng. Technol. Int. J., vol. 4, no. 03, pp. 194–208, 2022.